Cervis TM70 Instalační manuál Strana 34
- Strana / 76
- Tabulka s obsahem
- KNIHY
Hodnocené. / 5. Na základě hodnocení zákazníků
31
TM70Bi V3.1 (03/09) 1121174.pdf
IKUSI reserves the right to change this information without prior notice.
TM70 – “FIRST COME – FIRST SERVED” OPERATION
10.1 - INTRODUCTION
This option allows the operation of one crane individually by using two transmitters with two different
ID codes, which determine which transmitter is governing the crane at a certain time. For First come
– First served applications the receiver is required to scan the radio channels in order to receive
radio signals from different transmitters.
The First come – First served mode is defined by EEPROM, and the transmitters do not need to
have a selector. The First come – First served mode consists of a receiver which liberates the ID
code every time the receiver is switched off, and hence it starts searching for IDs defined in the
EEPROM ID code list. The first valid ID code found is selected, and locked on to it until the operator
releases the crane by pressing the Stop button. After a time defined in EEPROM (0.1 – 25 seconds,
default 4 seconds), the receiver liberates the ID to which it was locked and starts scanning IDs and
radio channels. The first transmitter switched on is the First transmitter to hold control of the crane,
and it will not let any other transmitter to have control of the crane until the transmitter is switched off.
A First Come – First Served operation with cranes is always delicate, given that the
receiver is FREE every time the STOP button is pressed or there is a radio link failure.
10.2 - TWO TRANSMITTER’S SYSTEMS
RECEIVER
1
ID1
F1
ID2
F2
F1
F2
TRANSMITTER 1
ID1
ID2
TRANSMITTER 2
Transmitters 1 and 2 have two different IDs and transmit in two different radio channels. Once the
receiver is switched off by any of the transmitters, after the liberation time defined in the EEPROM,
the receiver starts scanning for IDs and radio channels, looking for a frame with the start order
pressed.
A First come – First served system can have up to 32 different transmitters governing a single
receiver.
- IMPORTANT REMARK: 13
- FREQUENCY 20
- Channel MHz 24
- CANopen 26
- INTERFACE 26
- “FIRST COME – FIRST 33
- SERVED” 33
- OPERATION 33
- “PITCH & CATCH” 40
- ANALOGUE 47
- FEEDBACK 47
- CALIBRATION 47
- IN0450P 51
- A1P4RCAN 59
- +VI GND 62
- 18.- A1P4RCAN OPTION 63
- 19.- A2VCAN OPTION 68
- T70/1 & T70/2 ATEX 74
- TRANSMITTERS 74
Související produkty a manuály pro Dálková ovládání Cervis TM70
Dálková ovládání Cervis TM70 Uživatelský manuál
(49 stránky)
(49 stránky)
Dálková ovládání Cervis TM70 Uživatelský manuál
(37 stránky)
(37 stránky)
LG GN-M352CPGN manuals
Owner’s manuals and user’s guides for Fridges LG GN-M352CPGN.
We providing 1 pdf manuals LG GN-M352CPGN for download free by document types: User Manual
Komentáře k této Příručce